Motor Repair


CNC

Monitor Repair


CNC

ALARM 85 TO 87 (READER/PUNCHER INTERFACE ALARM) ALARM 90 | (REFERENCE POSITION RETURN IS ABNORMAL) | ALARM 300 (REQUEST FOR REFERENCE POSITION RETURN) ALARM 301 TO 305 | (ABSOLUTE PULSE CODER IS FAULTY) | ALARM 306 TO 308 | (ABSOLUTE PULSE CODER BATTERY IS LOW) | ALARM 350 (SERIAL PULSE CODER IS ABNORMAL) | ALARM 351 (SERIAL PULSE CODER COMMUNICATION IS ABNORMAL) | ALARM 400 (OVERLOAD) | ALARM 401 (*DRDY SIGNAL TURNED OFF) | ALARM 404 (*DRDY SIGNAL TURNED ON) | ALARM 410 (EXCESSIVE POSITION ERROR AMOUNT DURING STOP) | ALARM 411 (EXCESSIVE POSITION ERROR DURING MOVE) ALARM 414 (DIGITAL SERVO SYSTEM IS ABNORMAL) |ALARM 416 (DISCONNECTION ALARM) |  ALARM 417 (DIGITAL SERVO SYSTEM IS ABNORMAL) | ALARM 700 (OVERHEAT AT CONTROL SIDE) | ALARM 704 (SPINDLE SPEED FLUCTUATION DETECTION ALARM) | ALARM 749 (SERIAL SPINDLE COMMUNICATION ERROR) | ALARM 750 (SPINDLE SERIAL LINK CANNOT BE STARTED) | ALARM 751,761 (SPINDLE ALARM) ALARM 900 (ROM PARITY ERROR) | ALARM 910 AND 911 (DRAM PARITY ERROR) | ALARM 912 AND 913 (SRAM PARITY ERROR) | ALARM 920 AND 921 (WATCH DOG OR RAM PARITY) ALARM 924 (SERVO MODULE MOUNTING ERROR) | ALARM 930 (CPU ERROR) | ALARM 950 (PMC SYSTEM ALARM) | ALARM 960 (ABNORMAL 24 V INPUT POWER) | ALARM 970 (NMI ALARM IN PMC CONTROL MODULE) | ALARM 971 (NMI ALARM IN SLC) | ALARM 973 (NMI ALARM BY UNKNOWN CAUSE)